AURA is the wall-mounted bed head unit designed by Tedisel, totally
adaptable and modular.
Aura offers the best option to equip different hospital wards with a variable number of electrical and gas components.
Aura can be manufactured with several modular profiles that can match any standard or special configuration required.
On top of the standard configurations, our sales and technical team can also adapt Aura to any special specification required.
Aura design allows perfect adaptation to all hospital wards with different possible configurations.
Optimal design with atractive shape and fine lines.
Geometric lines enhance optimal cleanlines.
Aura modular design allows various configurations granting adequate space for all gas and electrical services.
The wider newly designed profiles allow suitable mounting for all standards of electrical and gas components.
AURA in detail
AURA is the bed head unit with a design based on geometric lines that facilitate its cleanliness.
The unit can be epoxy painted in any RAL colour or anodised.
Possibility to apply an HPL sheet on the frontal face or similar options on demand
The covers permit easy access to their interior.
Aura structure can integrate several technical rails which can be placed at the top, middle or bottom of the unit.
The technical bar can be used for mounting:
· Stainless steel shelf
· Monitor supports arms
· Infusion stands
· Examination and reading lamps
· Element basket holders
· Clamps to fit different equipments
Direct and indirect LED or flourescent lights are available in various configurations.
Aura is made of modular separated profiles that guarantie ideal internal segregation, keeping isolated electricaly from gas components.
Profile number 5 can be used instead of number 1 for either LED or fluorescent tube.
All electrical components can be fixed either on the chassis or front lids.
Max. Length of manufacture 3000mm*
* If it was required consecutive sections for many beds, the union is done from inside the bed head, making two sections visible.
Max. Load: 25 Kg x meter
Rated voltage: 110/230 V~
Rated frequency: 50-60Hz
Rated current: 10A or 16A per circuit. 20A and 25A optional
Lighting System (optional)
Direct light: Led 1x10W, led 1x20W
Indirect light: Led 1x20W, led 2x20W
Night light: 1,2W
Compressed gases: 5 bar
Compressed air-nitrogen supply to air motors: 10 bar
Gas type: O2 – Air – N2O – CO2 – VAC – AGSS – Air 800 – N2 800
Materials – 6060 / 6063 T5
Structure: Aluminum (3 mm thickness) with epoxy painting or anodized
Electrical/gas outlet plate: Aluminum with epoxy painting anodized, HPL or similar material
Technical rails: Stainless steel AISI 304 / Aluminum
End cover set: ABS injected / Aluminum (white)
Plastic diffuser: Extruded polycarbonate
For surfaces with good mechanical strength (concrete, brickwork, etc.) it is recommended to fix the product directly on the surface with expansion plugs and screws. On weak surface, this kind of surface should first be reinforced with a wooden insert fixed to the metal structure of the plasterboard in order to increase the consistency when fitting the screw.
Transportation and storage*
Ambient temperature: -10°C to +60°C
Relative humidity: 20% – 80%
* The following storage conditions apply for up to 15 weeks
Tedisel complies with the provisions of Directive 93/42/EEC (medical devices), ISO 11197 (medical supply units) and IEC 60601-1 (medical electrical equipment. Part1: general requirements for basic safety and essential performance).
Compatibility with other medical devices
Tedisel products may be equipped with medical devices from other manufacturers.
Please follow the instructions provided by the manufacturers of this equipment for proper installation.
CE 0197 – Notify Body
TüV Rheinland LGA Products GmbH