sistema arm system

Column with motor arm system for critical areas and operating theatres

Ceiling motor pendants in detail:

  • Smooth surface through concealed fasteners

  • 90cm2 space for cable routing

  • Motor arm pendant
  • Choosing the right pendant for the operating theatre and its supply, shall depend on the type of operating theatre in which it will be installed and the type of procedures.

    Ceiling pendants types:
    · General Surgery Ceiling pendants.
    · Anaesthesia Ceiling pendants.
    · Endoscopy Ceiling pendants.
    · Auxiliary support Ceiling pendants.
    · Anaesthesia lifter Ceiling pendants.

    The Tedisel Ceiling pendants integrate and support a wide range of equipment inside the same limited space. They guarantee an ergonomic and functional layout, for both the health care personnel and the patient.

  • Brakes
  • All the joints of the extension arms are equipped with either electromagnetic or electropneumatic brakes, and controlled by buttons or remote control (for anaesthesia lifter).

  • Motor Arms
  • The arms facilitate the proximity of the medical equipment to the health care personnel.
    Depending on the space available in the operating theatre, and the equipment needs of each intervention, different arm types can be selected.

  • Main Characteristics
  • Playload:
    TDSLift150M: up to 150 kg
    TDSLift250M: up to 250 kg
    · Braking mode: Electromagnetic or Electropneumatic
    · Height adjustment: 700 mm in 10-12 sec (20º+30º)
    · Motor control: Setup to customer needs
    · On site installation: Large openings to access the system
    · Design: No visible screws
    · Customizable according to each customer need.

    TECHNICAL DATA

    Electrical System
    Rated voltage: 110/230 V~
    Rated frequency: 50-60Hz
    Rated current: 10A or 16A per circuit. 20A and 25A optional

    Lighting System (optional)
    Positioning light integrating in the arm: 12 Vdc
    Positioning light in bottom of the service head 12: Vdc

    Gas system
    Compressed gases: 5 bar
    Compressed air-nitrogen supply to air motors: 10 bar
    Gas type: O2 – Air – N2O – CO2 – Vac – AGSS – Air 800 – N2 800

    Materials (Service Head) 6065 / 6063 T5
    Structure: Aluminum (3 mm to 12 mm thickness)
    Tubes: Stainless steel AISI 304
    Shelves: Stainless steel with epoxy painting
    Technical rails: Stainless steel AISI 304

    Instalation
    Fixation to concrete ceiling by ceiling plate.

    Transportation and storage
    The following storage conditions apply for up to 15 weeks:
    Ambient temperature: -25°C to + 70°C
    Relative humidity: 10% – 75%

    Ambient conditions
    Ambient temperature: +10 ºC – +40ºC
    Relative humidity: 30% – 75%

    Clasification
    Directive 93/42/EEC: CLASS II B

    EC Conformity
    Tedisel complies with the provisions of Directive 93/42/EEC (medical devices), ISO 11197 (medical supply units) and IEC 60601-1 (medical electrical equipment. Part1: general requirements for basic safety and essential performance).

    Compatibility with other medical devices
    Tedisel products may be equipped with medical devices from other manufacturers.
    Please follow the instructions provided by the manufacturers of this equipment for proper installation.

    CE 0197 – Notify Body
    TüV Rheinland LGA Products GmbH

    sistema bm arm system
    sistema bm arm system 3
    Download Motor Arm System data sheet
    Descarga PDF
    EC Declaration Conformity:
    certificate-SICA